At Beauflor® we believe that beautiful flooring is always at the heart of the home. Indeed, a perfect blend of textures and tones can bring to life an entire house.
Our design teams have thoroughly researched the world’s current trends and styles in indoor architecture, decoration and fashion to create our 2023 collections. We have something for everyone.
In addition, we offer several performance levels among our flooring range, from neat and easy vinyl rolls that breathe some life into rooms that are not often used, up to sturdy and resilient rolls that can take on heavy-duty foot traffic.
Check out one of our three ranges:
ULTRA - Style, beauty and strength to your interior in any area you choose.
OPTIMA - Stunning wood & stone designs with a level of realism rarely seen.
PRIMA - Beautiful collections of wood and tile designs with authentic detailing.
The choice is yours!
Are you looking to upgrade your floor with something durable and cost-effective? Then look no further than vinyl flooring. Vinyl has been around for decades and is growing in popularity due to its stunning durability and the fact that it’s one of the most affordable types of flooring.
Whether you’re a DIYer or planning to hire professionals, this post will answer all your questions about vinyl, from install costs and maintenance tips to options for different styles. Keep reading to get the facts on vinyl so you can make an educated decision about which type of flooring option is right for you!
Vinyl flooring can be installed as a DIY project or by professional installers. When it comes to the installation of vinyl roll flooring specifically, DIYers will need to make sure they have the proper tools and materials before they begin. Depending on the type of vinyl you choose, you may also need to apply adhesives or grout to properly secure it. If you do decide to have your vinyl flooring installed by a professional, be informed that they will charge an installation cost.
In general, the installation of vinyl roll flooring follows these 4 steps:
1. Rolling out your vinyl in the correct way and letting it adjust to the room.
2. Pre-cutting your vinyl roll.
3. Fitting your floor.
4. Attaching your vinyl floor to the subfloor.
More information about the installation process can be found here.
Vinyl flooring rolls can be cut with a standard utility knife and a hooked blade. Start by marking the roll where you want to make the cut, then use light score marks along the line of your mark so that it’s easier to follow as you start cutting.
Be sure to use a straight edge as a guide and go slowly so that you don't make any mistakes. Once your score lines are in place, press down on either side of the line while gently pulling the utility knife towards you. Continue this process until you have made a clean cut.
When you are cutting, it is important to know how you will place your roll (or rolls) in your room. That’s why measuring your room beforehand is a great way to avoid mistakes.
Always leave 5cm margin to each dimension so you have room to work with when finalizing the cutting and cut the floor in gradually with several small trimming cuts.
Our installation guide and videos will help you through the entire process.
When it comes to flooring, vinyl is one of the most popular options. It's affordable, durable and easy to maintain. But what do you do if your vinyl floor becomes rolled or bunched up?
Generally, rolling out your floor in your room with the correct room temperature should be enough to flatten your vinyl roll. However, if your vinyl flooring is rolled up, you can use an iron to flatten it.
Reverse the vinyl roll and place a towel over the area that needs to be flattened. Put the iron on a low setting and press it over the towel for about five seconds.
While the vinyl roll is still warm, you can bend it softly against the curl to achieve the wanted result. Be careful not to leave the iron on too long or else it could damage your flooring!
Vinyl flooring is a popular and affordable floor covering option for many homes. It comes in many different styles, colors, textures and thicknesses. Vinyl flooring has a protective wear layer that helps it resist scratches, stains, scuffs and other signs of wear. It's also easy to install and maintain, making it an ideal choice for busy households.
Vinyl rolls come in a variety of widths - ranging from 2 to 5 meters - that make them perfect for any room size. In the other end, they offer custom lengths so that you can minimize waste and get the exact amount of vinyl needed for each room. This versatility is great for those looking to create unique flooring designs without having to worry about measuring and cutting, allowing more freedom to plan out.
Yes, vinyl flooring comes on a roll. Vinyl rolls are convenient because they can be cut to size so you don't have to worry about measuring and cutting individual pieces of tile or plank vinyl. Vinyl rolls also offer more coverage than tiles, making them ideal for larger rooms or spaces that require a seamless look. When installed correctly, the rolls will look like a single sheet of vinyl, creating the perfect foundation for any room.
In some cases, yes, vinyl flooring needs to be glued down. This is the best and most secure way to install vinyl flooring to ensure it stays in place and won't move or become damaged over time. Glue also provides a watertight seal that will help protect your vinyl from any moisture or humidity that could potentially damage it.
The weight of a roll of vinyl flooring can vary depending on the thickness and width of the vinyl. Typically, it weighs between 2 to 8 pounds per square yard. It is important to take into account the weight of your vinyl when calculating how much you need for a particular space or room. Also keep in mind that heavier vinyls may require additional support and reinforcement, as well as a stronger adhesive, to ensure proper installation.
Before making any purchase with vinyl flooring, you should take into consideration the room size, layout and traffic volume that will be exposed to the product. This will help you determine which type of vinyl will be the best option for your space. Additionally, you should also keep in mind factors such as installation requirements, how easy it is to clean and maintain, and what warranty options are available. Doing research before investing in any type of flooring can save you time and money in the long run!
Yes, you can lay vinyl roll over laminate. However, it is important to make sure that the underlayment and subfloor are in good condition, and level before laying the vinyl roll. You should also ensure that any existing seams between boards are filled properly and securely so that the vinyl does not buckle or come loose.
Additionally, be sure to use a high-quality adhesive to adhere the vinyl roll to the laminate. This will help create a secure and solid connection between both materials that will last for years to come.
One of the key advantages of vinyl roll flooring, is that it can be placed on any firm and flat underlay. Whether it’s an old floor or a layer of plywood, as long as you can lay your roll on it and put adhesive on it, it will work.
Yes, vinyl flooring needs underlayment in order to provide cushioning and insulation from moisture and indentations. Underlayment also helps reduce the sound of foot traffic and provide a comfortable surface to walk on. It is important to choose an underlayment that is designed specifically for vinyl flooring, as this will ensure the best performance and protection from any potential damage.
The best underlayment for vinyl flooring is one that provides cushioning and insulation, as well as adequate moisture protection. Thick foam options are usually the most recommended, as they offer superior comfort and durability. There are also specialized underlays designed specifically for vinyl, which typically provide better sound reduction and a more stable surface.
Yes, you can put vinyl flooring over tiles. However, it is important to make sure that the surface of the tiles is smooth, level and clean first. Additionally, a primer might be required in order to ensure proper adhesion between the vinyl and the tile. Be sure to use a high-quality adhesive specifically designed for vinyl when installing so that it lasts for years to come.
Before installing vinyl over tiles, make sure that you check the manufacturer’s instructions as there may be special requirements or restrictions. This will help ensure that your installation is done correctly and safely.
Vinyl floors should be cleaned regularly with a damp mop and mild cleaning solution. Avoid using abrasive cleaners, as they can cause damage to the vinyl flooring’s finish. If possible, use a microfiber mop, as this will help reduce streaks or smudges. Additionally, always dry the floor after mopping to prevent water spots or discoloration.
For tougher stains, a vinyl floor cleaner specifically designed for this type of material is recommended. Be sure to follow the instructions and safety precautions on the label before using any cleaner.
The best way to maintain vinyl floors is to clean them regularly and protect them from scratches or scuffs. Regularly sweeping or vacuuming the floor will help keep dirt and debris from piling up on the surface, while using felt pads under furniture legs can protect it from further damage. Additionally, using a doormat at all entryways will help reduce the amount of dirt tracked indoors .
Finally, be sure to use the appropriate cleaning solutions and techniques when caring for your vinyl floor. This will help ensure that it lasts for years to come.
It is not recommended to paint vinyl roll flooring because it can cause the vinyl to become brittle and chip away over time. Furthermore, paint may not stick properly to the surface of the vinyl and therefore will not last very long. Additionally, painting over a vinyl roll flooring could lead to air bubbles forming on top of the paint, which would eventually result in peeling or lifting of sections of paint. In order to protect the life and structure of your vinyl roll flooring, it is best to avoid painting it altogether.
When your vinyl floor reaches the end of its lifecycle, the best – and most cost-effective way – to make it look new again, is by simply replacing it.